New Products!
ALUMIL S650 Phos
Alumil’s new sliding thermal insulating system S650 is the ideal solution for wide spans with extensive glazing surfaces that offers elegant constructions with high functionality, performances and minimal architectural design.
The system’s main advantage is the improvement of living conditions by maximizing the natural lighting and minimizing the visible aluminum face width, which makes the residents feel closer to the external environment and increase the sense of freedom.
-
All the aluminum profiles are totally concealed in wall maximizing natural lighting in the buildings.
-
Only 25 mm visible aluminium face width at the interlocking profile.
-
Perimetrical sealing of the frames with double row of brushes.
-
Extra concealed profiles available for water drainage.
-
Corner constructions without using mullion profile for the connection.
-
For all typologies of sliding doors.
-
Easy installation / removal of the sash in case of maintenance or replacement.
-
UW = 0,8 W/m2K
-
Sliding Type: Slide
-
Type of thermal insulation: 18,6 mm polyamide, pvc
ALUMIL S700
S700 is a top class LIFT-SLIDE system, for very large openings with impressive, out of competition characteristics.
-
Narrow sash face of only 84 mm
-
Interlocking face width of only 47mm for double sash sliding doors, for maximum visibility, and door height up to 3,00 m
-
Concealed threshold profile, flash to the floor
-
Smart water evacuation system, perfect for heavy rainfalls
-
Smart drainage device under the interlocking profiles guarantees water tightness
-
Special 24mm anti-distortion polyamides, for avoiding the banana effect, due to high temperature differences between indoors and outdoors
-
Very high thermal insulation: Uf up to 2.4 W/m2K
-
Can also be a classic LIFT-SLIDING with the same frame profile all around and with the same performances
-
Exterior aesthetics: Flat
ALUMIL S440
The S440 is the latest proposal for thermally insulated sliding systems. Alumil created the innovative sliding system S440 according to the modern architectural trends and the requirements for higher energy-efficient systems and excellent performances. The linear profiles’ shape has been designed so as to minimize both the visible aluminum frame and the visible depth of the system.
-
Minimum sash height 75 mm for maximizing visibility and natural lighting.
-
Specifically designed sash for reinforcing the alignment of the profiles.
-
Narrow interlocking profile with 39 mm visible aluminum face width.
-
Two sash profiles available for 45ο and 90ο assembling.
-
Fiberglass reinforced polyamides of 40mm width in the frame and 40mm, 32mm width in the sash profile offering to the system a high level of thermal insulation (Uf = 2,6 W/m2K).
-
Extra thermal insulation at the interlocking point by using PVC profile.
-
PVC profiles for drainage with specially designed clipped cover that offers high watertightness and reduces visually the frame’s depth according to the minimal design of the system.